Energy Control Thermostats

This electronic thermostat is supplied with a display and time clock and is pre-programmed by a menu - structure with instructive software, which is built up from 3 parts. In principle, the display functions as a brief instruction, though which the user is guided in the adjusting/adapting of the settings.

The special one-time start-up menu is activated as soon as the thermostat is connected for the first time. At that point some standard data need to be adjusted. After the adjustment of the start menu, the date and time can be adjusted so that the thermostat will start automatically after the required dry off time of the floor.

With the menu-button the user can correct and/or adjust the programme.

With the mode-button temporary adjustments can be set by the user.

Multifunctional: The E-control has been developed especially for electrical floor heating, however is multifunctional in it's use and is suitable for all other systems in/on floors, walls or ceilings.

Magnum energy control thermostat is ready-to-use and very easy to install in any standard junction box. When necessary, an optional base plate is available. The thermostat works on a floor sensor with a sensor cable which is supplied as standard.

Two electric-pipes need to be lead to the power supply because the power supply cable and the sensor cable can never go through one pipe together.

Magnum energy control clock thermostat is also available separately. In general the thermostat is supplied standard in the Enermat and Enercable ranges.