Enercable - Underfloor Heating Cable

• Click here for our underfloor heating cable Price List

Enercable electric underfloor heating system is a mains voltage system which is controlled by a programmable thermostat and floor sensor. The system output can be adjusted from 80 to 200 watts per m². The system is installed when the base floor is being laid and is covered with a minimum sand cement screed. ( see instructions )

• New build/new floors with a minimum covering of sand/cement screed on top depending on the floor construction ( see Underfloor Heating Cable instructions )
• Mains Voltage
• Variable wattage using spacer strips
• 7mm waterproof resistance cable
• Can be primary or comfort heating system
• Maintenance free heating
• Cheaper to install in large areas
• Operates through a ME digital thermostat control and floor sensor with 6 programmes - economy settings and energy check facility.
• For concrete floors with any type of floor finish ( see Enercable instructions )

Enercable is an ideal conservatory heating system. We have also used this product as a mains source of heat for new flats and apartment projects.

This electric underfloor heating system is very cost effective and efficient for large areas.

Enercable is an under floor heating system which is suitable for almost every situation and floor construction. Enercable is an ideal “invisible” heat source with no clutter from pipes and radiators.

The system offers complete freedom in the location of furniture and internal room divisions; it is totally silent and maintenance-free. The system makes optimal use of the heat storage properties of the floor to promote even heat delivery. This ensures extremely comfortable and pleasant floor temperature. Fitting a separate built-in digital clock thermostat within each room allows each space to be heated according to individual heating requirements and in line with the level of occupation. This allows the highest possible levels of comfort in an extreme efficient and energy-conscious manner.

Enercable can be installed in virtually any shape or size of room. The total constructional depth required (finishing floor screed and heating system) is approximately 30 mm for non-floating floors. Where extra floor insulation is used (e.g. floating floors) the minimal constructional depth required is 65mm. The cable can be fixed to concrete reinforcing mesh using tie raps or directly to the concrete sub floor using spacer strips.

Enercable electrical under floor heating provides advantages in comparison to water based floor heating systems:

Suitable as main* or auxiliary heating source

Very easy to install

Very easy to use

No water: no risk for water leakage!

No break and cutter work necessary

To be installed directly under the top layer.

Every room can have its own thermostat

The highest possible level of comfort

Extremely efficient and energy-conscious

No maintenance costs

* Main heating is not possible in all situations. For more information contact Enerfoil magnum Ltd